Nov 9, 2018
Laughing Fact
Laughing for
fifteen minutes has the same benefit as getting two extra hours
of sleep.
Ceiling Fan Changes
Many people do not realize the difference made with the
reversal of ceiling fans between summer and winter. Ceiling fans
are designed to cool you off during the summer and warm you in
the winter.
Every ceiling fan has a switch. When the temperature level drops in late fall, flip the switch so the fan is moving clockwise as you look up to it. This redirects rising hot air back down into the room, making it feel warmer. Using a fan during the winter can save as much as 10% to 15% of heating costs. Also remember to slow down the speed during winter.
During the summer you want the fan to blow air straight down, so your ceiling fan needs to run in a counter clockwise direction as you look up at it. The warmer it is, the higher the speed should be. During the winter, your fan should run at a low speed in a clockwise direction, which pushes the naturally rising warm air back down.
Incidentally, the two largest consumers of your energy costs are heating and air conditioning. Fans can mitigate some of those costs, because the worst energy guzzling ceiling fans on the market, on average will likely cost less than 2 cents per hour to run, depending on local energy costs.
Every ceiling fan has a switch. When the temperature level drops in late fall, flip the switch so the fan is moving clockwise as you look up to it. This redirects rising hot air back down into the room, making it feel warmer. Using a fan during the winter can save as much as 10% to 15% of heating costs. Also remember to slow down the speed during winter.
During the summer you want the fan to blow air straight down, so your ceiling fan needs to run in a counter clockwise direction as you look up at it. The warmer it is, the higher the speed should be. During the winter, your fan should run at a low speed in a clockwise direction, which pushes the naturally rising warm air back down.
Incidentally, the two largest consumers of your energy costs are heating and air conditioning. Fans can mitigate some of those costs, because the worst energy guzzling ceiling fans on the market, on average will likely cost less than 2 cents per hour to run, depending on local energy costs.
Funny Words
Umpty
had been in use since the mid 19th Century as a slang term for
an unspecified or seemingly impossibly large number, such as the
word umpteen in the early 1900s.
Twankle, according to the English Dialect Dictionary (1905), to twankle is ‘to twang with the fingers on a music instrument’. Absentmindedly strumming or playing an instrument is also known as twiddling, twangling, tootling, noodling, plunking, or thrumming.
Xanthippe is a scolding, quarrelsome woman, named after the wife of the Greek philosopher Socrates, who was referred to by one of his students as "the most difficult woman not just of this generation … but of all the generations past and yet to come". While the reasons for that reputation are unclear, Xanthippe’s name ended up in the dictionary as a reference to a henpecking, argumentative spouse.
Twankle, according to the English Dialect Dictionary (1905), to twankle is ‘to twang with the fingers on a music instrument’. Absentmindedly strumming or playing an instrument is also known as twiddling, twangling, tootling, noodling, plunking, or thrumming.
Xanthippe is a scolding, quarrelsome woman, named after the wife of the Greek philosopher Socrates, who was referred to by one of his students as "the most difficult woman not just of this generation … but of all the generations past and yet to come". While the reasons for that reputation are unclear, Xanthippe’s name ended up in the dictionary as a reference to a henpecking, argumentative spouse.
Cultured Chicken Nuggets
The Just company is predicting that it will have
a cultured chicken nugget available during 2018. It is not the
only company doing so, but will be the first of many to produce
a cultured product.
The CEO said in an interview that his company would have a chicken nugget, foie gras, or sausage available by the end of 2018. Looks like it will be a chicken nugget. The company calls it 'clean meat'.
To make cultured chicken, you first collect some cells, and that can be done through a small harmless biopsy from a live chicken, through a cell bank, feathers, or other ways. The cells are separated and the best are loaded into a bioreactor, given plant based nutrients, and a scaffolding material on which to grow. It can take from a few days to a few weeks to produce a nugget.
Two BBC News reporters were able to try a sample and said it was flavorful, that the skin was crisp, and the texture was slightly softer than that of fast food nuggets.
The plan is to introduce the product in Europe first, and then the US, after FDA and USDA decide how to deal with it.
Not sure they will stack up well to the new McDonald's Triple Breakfast Stacks. Each sandwich features two sausage patties, two slices of cheese, eggs, and bacon strips. Guests can choose between a McMuffin, Biscuits, or a McGriddle triple.
The CEO said in an interview that his company would have a chicken nugget, foie gras, or sausage available by the end of 2018. Looks like it will be a chicken nugget. The company calls it 'clean meat'.
To make cultured chicken, you first collect some cells, and that can be done through a small harmless biopsy from a live chicken, through a cell bank, feathers, or other ways. The cells are separated and the best are loaded into a bioreactor, given plant based nutrients, and a scaffolding material on which to grow. It can take from a few days to a few weeks to produce a nugget.
Two BBC News reporters were able to try a sample and said it was flavorful, that the skin was crisp, and the texture was slightly softer than that of fast food nuggets.
The plan is to introduce the product in Europe first, and then the US, after FDA and USDA decide how to deal with it.
Not sure they will stack up well to the new McDonald's Triple Breakfast Stacks. Each sandwich features two sausage patties, two slices of cheese, eggs, and bacon strips. Guests can choose between a McMuffin, Biscuits, or a McGriddle triple.
Quick Emojis
Emojis are fun and now you can get at them fast. Place the
cursor where you want to insert.
For Windows 10, press the Windows key and . (period) key to display the Emoji keyboard. This does not work on previous versions of Windows.
For Mac users, press Command and Control and Spacebar to access them.
For Windows 10, press the Windows key and . (period) key to display the Emoji keyboard. This does not work on previous versions of Windows.
For Mac users, press Command and Control and Spacebar to access them.
Nov 2, 2018
Happy Friday
Only when our thoughts,
words, and deeds align can we find true happiness.
Today everything is lined up to enjoy a Happy Friday!
Today everything is lined up to enjoy a Happy Friday!
Daylight Saving
Having
not learned from previous disasters, many US states and some
countries are again attempting to thwart Mother Nature by
ignoring reality and changing our clocks backward while the sun
and moon march on. Interesting that as countries change clocks,
they still do not agree which date to make the time change, and
they do not agree by how much time to change, or at which time
to make the change. In the US changes are made at 2am, November
4. That is a day earlier than during 2017.
In some countries, Daylight Saving Time (DST) is also called “summer time”. When DST is not observed, it is called standard time, normal time, or winter time. Just 70 of the total 195 countries in the world utilize Daylight Saving Time in at least a portion of the country. Japan, India, and China do not observe Daylight Saving. China and India have the number one and two largest populations in the world, which amounts to 36% of the world population.
In the US, Florida Legislature overwhelmingly passed the “Sunshine Protection Act” by a margin of 103 to 11 in the House and 33 to 2 in the Senate, making it the only state to adopt Daylight Saving Time (as opposed to Standard Time) year-round, eliminating the clock changes. The bill went to the Governor's desk in March, 2018 and was signed into law. Now the bill goes to Congress. Looks like no law congressional change means Floridians will be required to change clocks again.
None of the US dependencies observe DST, including American Samoa, Guam, Puerto Rico, the Northern Mariana Islands, the US Minor Outlying Islands, and the US Virgin Islands.
Tasmania, Queensland, and Western Australia have changeable dates to change clocks, often changing their dates due to politics or to accommodate festivals. In 1992, Tasmania extended daylight saving by an additional month while South Australia began extending daylight saving by two weeks to encompass the Adelaide Festival. In some years, Victoria extended daylight saving to the end of March for the Moomba Festival and South Australia and New South Wales followed suit for consistency. Special daylight saving arrangements were observed during the Sydney 2000 Olympic Games. Queensland does not observe daylight saving.
In some countries, Daylight Saving Time (DST) is also called “summer time”. When DST is not observed, it is called standard time, normal time, or winter time. Just 70 of the total 195 countries in the world utilize Daylight Saving Time in at least a portion of the country. Japan, India, and China do not observe Daylight Saving. China and India have the number one and two largest populations in the world, which amounts to 36% of the world population.
In the US, Florida Legislature overwhelmingly passed the “Sunshine Protection Act” by a margin of 103 to 11 in the House and 33 to 2 in the Senate, making it the only state to adopt Daylight Saving Time (as opposed to Standard Time) year-round, eliminating the clock changes. The bill went to the Governor's desk in March, 2018 and was signed into law. Now the bill goes to Congress. Looks like no law congressional change means Floridians will be required to change clocks again.
None of the US dependencies observe DST, including American Samoa, Guam, Puerto Rico, the Northern Mariana Islands, the US Minor Outlying Islands, and the US Virgin Islands.
Tasmania, Queensland, and Western Australia have changeable dates to change clocks, often changing their dates due to politics or to accommodate festivals. In 1992, Tasmania extended daylight saving by an additional month while South Australia began extending daylight saving by two weeks to encompass the Adelaide Festival. In some years, Victoria extended daylight saving to the end of March for the Moomba Festival and South Australia and New South Wales followed suit for consistency. Special daylight saving arrangements were observed during the Sydney 2000 Olympic Games. Queensland does not observe daylight saving.
Wordology, Break the Ice
It means to do or say something to relieve tension
or get conversation going in a strained situation.
In the old days, commercial ships would often get stuck in frozen rivers during winter, so smaller ships called icebreakers would come to clear a path to shore by breaking the ice. During the 17th century, people began to use the phrase to mean "to reduce tension in a social situation."
In the old days, commercial ships would often get stuck in frozen rivers during winter, so smaller ships called icebreakers would come to clear a path to shore by breaking the ice. During the 17th century, people began to use the phrase to mean "to reduce tension in a social situation."
Ductility vs. Malleability vs. Toughness vs. Brittleness
Ductility is the property of metal with the ability to stretch so it bends, but
does not does not break. When you stretch steel it breaks when
you bend it and copper does not. So copper is ductile, steel is
not.
Malleable metals like aluminum can be pressed. You cannot stretch aluminum as well as copper, but you can press it between rollers and make sheets so fine that it makes aluminum foil. You can also squeeze copper, but not quite as thin, as it will tear. Copper is not as malleable as aluminum.
Incidentally, Sir Humphry first spelled it alumium in 1807 then changed it to aluminum, and finally settled on aluminium in 1812. Americans and Canadians spell and pronounce the name aluminum, while the British and most of the rest of the world use the spelling and pronunciation of aluminium.
Toughness is about how strong metal is after processing. Toughness is not only how much force can you apply before it snaps, it is also a question of whether the metal has some bend before it breaks. This is called "deflection". Steel is tough so you do not pound it into shape, because it just dents and malforms.
Hardness is about withstanding impacts and pressure. Steel, as opposed to quartz, is not hard; and it is not brittle. Steel cannot take as much pressure pushing against it as quartz or diamonds; it will bend or malform and will also break sooner. The end result of that pressure is brittleness. So steel has good hardness and low brittleness.
Quartz has high hardness, high brittleness, low toughness. What this means is that it takes a lot of pressure or a very sharp, fast strike to break it, and when it breaks it snaps or shatters. Quartz has no malleability and no ductility. Under heat and/or pressure, it breaks. The quality of shattering instead of breaking cleanly is brittleness.
Bottom line, copper ductile, aluminum malleable, steel tough, quartz brittle.
Malleable metals like aluminum can be pressed. You cannot stretch aluminum as well as copper, but you can press it between rollers and make sheets so fine that it makes aluminum foil. You can also squeeze copper, but not quite as thin, as it will tear. Copper is not as malleable as aluminum.
Incidentally, Sir Humphry first spelled it alumium in 1807 then changed it to aluminum, and finally settled on aluminium in 1812. Americans and Canadians spell and pronounce the name aluminum, while the British and most of the rest of the world use the spelling and pronunciation of aluminium.
Toughness is about how strong metal is after processing. Toughness is not only how much force can you apply before it snaps, it is also a question of whether the metal has some bend before it breaks. This is called "deflection". Steel is tough so you do not pound it into shape, because it just dents and malforms.
Hardness is about withstanding impacts and pressure. Steel, as opposed to quartz, is not hard; and it is not brittle. Steel cannot take as much pressure pushing against it as quartz or diamonds; it will bend or malform and will also break sooner. The end result of that pressure is brittleness. So steel has good hardness and low brittleness.
Quartz has high hardness, high brittleness, low toughness. What this means is that it takes a lot of pressure or a very sharp, fast strike to break it, and when it breaks it snaps or shatters. Quartz has no malleability and no ductility. Under heat and/or pressure, it breaks. The quality of shattering instead of breaking cleanly is brittleness.
Bottom line, copper ductile, aluminum malleable, steel tough, quartz brittle.
Printing Veins with a 3D Printer
Engineers at the University
of Colorado Boulder have developed a way to mimic the complex
geometry of blood vessels using 3D printing. The technique could
help doctors come up with new ways to fight vascular disease
such as hypertension, by creating artificial tissue with soft,
pliable arteries and veins. It uses oxygen to set 3D-printed
models with different degrees of hardness.
"Oxygen is usually a bad thing in that it causes incomplete curing," said Yonghui Ding, one of the authors of the study. "Here, we utilize a layer that allows a fixed rate of oxygen permeation." By tightly controlling how oxygen is spread during the printing process, the researchers were able to build objects with the same geometry, but with different levels of rigidity. The results were published in the journal Nature.
As part of their experiment, the engineers created a small Chinese warrior figure, printed so that the outer layers remained hard while the interior remained soft. They also printed three versions of a simple structure. a beam supported by two rods. Depending on how hard or soft the different parts were designed to be, the structure would either stand firm or slump.
The printer can currently work with biomaterials down to a size of 10 microns; about one-tenth the width of a human hair. Future iterations will aim to get this down even further.
"Oxygen is usually a bad thing in that it causes incomplete curing," said Yonghui Ding, one of the authors of the study. "Here, we utilize a layer that allows a fixed rate of oxygen permeation." By tightly controlling how oxygen is spread during the printing process, the researchers were able to build objects with the same geometry, but with different levels of rigidity. The results were published in the journal Nature.
As part of their experiment, the engineers created a small Chinese warrior figure, printed so that the outer layers remained hard while the interior remained soft. They also printed three versions of a simple structure. a beam supported by two rods. Depending on how hard or soft the different parts were designed to be, the structure would either stand firm or slump.
The printer can currently work with biomaterials down to a size of 10 microns; about one-tenth the width of a human hair. Future iterations will aim to get this down even further.
Wordology, Put a Sock In It
This means stop talking. It comes from the
late 19th century when people would use woolen socks to stuff
the horns of their gramophones or record players to lower the
sound, because these machines had no volume controllers.
Size Matters
I
took a look at 2018 populations and land sizes in the various
countries that are dominating the news. It is interesting that
the news describes the economic and other influences out of
proportion to the population or size of these areas. For
instance the news would have us think there is not much to
Mexico, but its population is the fourth largest in the world
and has the sixth largest land mass in the world. Also, Iran is
not just a little dot in the desert.
I threw in three states, California, Florida, and Texas for comparison.
I threw in three states, California, Florida, and Texas for comparison.
Oct 27, 2018
Happy Friday
Life happens, whether
you take advantage of it or not.
Be happy and take advantage of celebrating a Happy Friday!
Be happy and take advantage of celebrating a Happy Friday!
What's in a Name, Chock Full O'Nuts
The coffee is named for a chain of nut stores
the founder converted into coffee shops. Its coffee does not
contain nuts.
Subscribe to:
Posts (Atom)